Micro End Mill Taiwan Leading Manufacturer- SA-TOOLS

PRODUCTS

顯示

MYBS-2-Flute Short-Shank Micro Ball End Mill

Recommended for fine 3D surface finishing in prehardened and hardened steels.
This TiSiN-coated, two-flute ball end mill has a 30° helix and the same ball-diameter and 2×D cutting-length options as MYB. Its 45 mm overall length suits setups requiring a shorter tool.
⌀0.1–0.9 mm; 10 sizes.

MYES-2-Flute Short-Shank Micro End Mill

A short-shank, two-flute option for micro-slotting, side milling and flat-surface finishing in prehardened steel and hardened steel at the 62 HRC level.
It retains MYE’s 2×D cutting length, 30° helix and TiSiN coating in a 45 mm overall length for compact micro-machining setups with limited tool-length space.
⌀0.1–0.95 mm; 18 sizes.

MYB-2-Flute Micro Ball Mill for Hardened Steel

Recommended for fine 3D surface finishing in prehardened and hardened steels.
The TiSiN-coated, two-flute ball nose has a 30° helix and a 2×D cutting length for detailed milling of curved surfaces and rounded transitions.
⌀0.1–0.9 mm; 10 sizes.

MYE-2-Flute Micro End Mill for Hardened Steel

For micro-slotting, side milling and flat-surface finishing in prehardened steel and hardened steel at the 62 HRC level.
Two flutes with a 30° helix and TiSiN coating provide a 2×D cutting length. The square-end geometry machines slot walls and flat floors in miniature steps and detailed profiles.
⌀0.1–0.95 mm; 18 sizes.

MYNB-2-Flute Long-Neck Micro Ball End Mill for Hardened Steel

Recommended for fine 3D finishing in prehardened and hardened steels, including small contours at greater reach or close to adjacent walls.
Two flutes, a 30° helix and TiSiN coating are paired with a short cutting section and reduced neck for wall clearance in extended-reach work. Each diameter offers multiple effective lengths.
⌀0.1–0.9 mm; 94 sizes.

UYBS-2-Flute Short-Shank Micro Ball End Mill

Recommended for fine contours and radii in carbon, alloy and prehardened steels when a short-shank, two-flute ball end mill is preferred.
AlTiCrN-coated, with the same radius, cutting length and shank diameter as the corresponding UYB sizes. Its 45 mm overall length is 5 mm shorter for setups requiring a shorter tool.
⌀0.1–0.9 mm; 10 sizes.

MYNE-2-Flute Long-Neck Micro End Mill

For miniature slots, sidewalls and stepped floors at greater reach in prehardened steel and hardened steel at the 62 HRC level.
The TiSiN-coated, two-flute design combines a 30° helix with a 1×D cutting length. Its reduced neck extends access to detailed profiles beyond an upper wall.
⌀0.1–0.9 mm; 97 sizes.

MYR-2-Flute Micro Radius Mill for Hardened Steel

Recommended for fine profiling, slotting and floor-to-wall fillet finishing in prehardened and hardened steels.
Two flutes and a 30° helix are paired with TiSiN coating. The flat end mills the floor, while radiused corners form the transition to the side wall.
⌀0.2–0.9 mm; 24 sizes.

UYB-2-Flute Micro Ball End Mill

Recommended for fine contours and radii in carbon, alloy and prehardened steels, particularly small features on miniature parts.
The two-flute, 30°-helix design combines AlTiCrN coating with a 2×D length of cut. Its ball-nose profile suits continuous curved surfaces and small blended internal radii.
⌀0.1–0.9 mm; 10 sizes.

MYNR-2-Flute Long-Neck Micro Radius Mill for Hardened Steel

Recommended for fine profiles and floor-to-wall fillets in recessed areas of prehardened and hardened steel parts.
The short cutting section and reduced neck provide wall clearance for localized finishing. The design uses two flutes, a 30° helix and TiSiN coating.
⌀0.2–0.9 mm; 106 sizes.

UYESS-2-Flute Short-Shank Micro End Mill

For micro side milling, slotting and flat-surface machining in aluminum alloys and copper, as well as detailed profiles in resin and graphite.
Two flutes with a 30° helix and ta-C coating combine a 3×D cutting length with a compact 38 mm overall length for miniature parts requiring cutting coverage along taller fine-scale walls.
⌀0.1–0.99 mm; 90 sizes.

UYES-2-Flute Short-Shank Micro End Mill

A short-shank, two-flute option for micro-slotting, side milling and flat-surface machining in carbon, alloy and prehardened steels.
The 45 mm overall length retains UYE’s 2×D cutting length, 30° helix and AlTiCrN coating for compact micro-machining setups with limited tool-length space.
⌀0.1–0.95 mm; 18 sizes.

Page：資料總數：73