Micro End Mill Taiwan Leading Manufacturer- SA-TOOLS

PRODUCTS

顯示

UYESS-2-Flute Short-Shank Micro End Mill

Short-shank, two-flute micro end mill for fine slots, flat surfaces and detailed contours in aluminum alloys and copper.
The low-friction ta-C coating helps reduce material adhesion. A flute length of three times the cutting diameter provides reach and chip space for detailed milling.
⌀0.10–0.99 mm; 90 sizes.

MYES-2-Flute Short-Shank Micro End Mill

Short-shank, two-flute micro end mill for fine slots, flat surfaces and detailed contours in pre-hardened and hardened steels.
Its 45 mm overall length suits compact setups. Two flutes provide chip space, and the TiSiN coating supports wear resistance in small-diameter milling.
⌀0.10–0.95 mm; 18 sizes.

MYR-2-Flute Micro Radius Mill for Hardened Steel

Recommended for fine profiling, slotting and floor-to-wall fillet finishing in prehardened and hardened steels.
Two flutes and a 30° helix are paired with TiSiN coating. The flat end mills the floor, while radiused corners form the transition to the side wall.
⌀0.2–0.9 mm; 24 sizes.

MYE-2-Flute Micro End Mill for Hardened Steel

Two-flute micro end mill for fine slots, flat surfaces and detailed contours in pre-hardened steel. The indicated hardness range extends to 62 HRC, subject to cutting conditions.
Its two-flute, 30° helix design provides chip space for small-diameter cuts, while the TiSiN coating supports edge wear resistance.
⌀0.10–0.95 mm; 18 sizes.

MYNE-2-Flute Long-Neck Micro End Mill

The long, reduced neck provides access to deep slots and narrow mold ribs. Check effective length and neck diameter against the required depth and clearance.
Two flutes provide chip space; the TiSiN coating supports detailed milling in pre-hardened and hardened steels.
⌀0.10–0.90 mm; 97 sizes.

MYNR-2-Flute Long-Neck Micro Radius Mill for Hardened Steel

Recommended for fine profiles and floor-to-wall fillets in recessed areas of prehardened and hardened steel parts.
The short cutting section and reduced neck provide wall clearance for localized finishing. The design uses two flutes, a 30° helix and TiSiN coating.
⌀0.2–0.9 mm; 106 sizes.

UYR-2-Flute Micro Corner Radius End Mill

Recommended for fine profiling, slotting and floor-to-wall fillets in carbon, alloy and prehardened steels.
The AlTiCrN-coated design uses two flutes and a 30° helix. Its flat end and radiused corners suit floor finishing and the fillets along adjacent walls.
⌀0.2–0.9 mm; 24 sizes.

UYES-2-Flute Short-Shank Micro End Mill

A short-shank, two-flute micro square end mill for fine slots, side walls and flat surfaces in carbon, alloy and pre-hardened steels.
Cutting length is twice the diameter, with a 45 mm overall length. Select by machining depth and tool overhang; the tool has a 30° helix and AlTiCrN coating.
⌀0.10–0.95 mm; 18 sizes.

UYE-2-Flute Micro Square End Mill

Two-flute micro end mill for fine slots, flat surfaces and detailed contours in carbon, alloy and pre-hardened steels.
Its 30° helix and two-flute design provide chip space for small-diameter milling; the AlTiCrN coating supports edge wear resistance.
⌀0.10–0.95 mm; 18 sizes.

KOA-Engraving Cutter

Recommended for lettering, fine-line engraving and edge chamfering in aluminum alloys, copper and resin.
The AlTiN-coated, single-flute conical tip is offered in different angles and tip sizes to suit fine lettering, engraved-line openings and chamfer profiles.
⌀0.05–1.5 mm; 61 sizes.

UYNR-2-Flute Long-Neck Micro Radius Mill

Recommended for fine profiles and floor-to-wall fillets in recessed areas of prehardened steel parts.
A short cutting section and reduced neck provide wall clearance around localized features. Two flutes, a 30° helix and AlTiCrN coating suit fine profile and floor-fillet work.
⌀0.2–0.9 mm; 106 sizes.

UYNE-2-Flute Long-Neck Micro End Mill

A two-flute long-neck micro square end mill for narrow slots and recessed side walls in carbon, alloy and pre-hardened steels.
The reduced neck provides clearance near adjacent walls. Check effective reach and neck diameter against the required depth and possible interference; the tool is AlTiCrN-coated.
⌀0.10–0.90 mm; 97 sizes.

Page：資料總數：73