Micro End Mill Taiwan Leading Manufacturer- SA-TOOLS

PRODUCTS

顯示

UYNB-2-Flute Long-Neck Micro Ball End Mill

Recommended for fine 3D contours in carbon, alloy and prehardened steels, including small features at greater reach or near adjacent walls.
The two-flute, 30°-helix design uses AlTiCrN coating. A short cutting section and reduced neck combine cutting reach with wall clearance, with multiple effective-length options at each diameter.
⌀0.1–0.9 mm; 94 sizes.

UYR-2-Flute Micro Corner Radius End Mill

Recommended for fine profiling, slotting and floor-to-wall fillets in carbon, alloy and prehardened steels.
The AlTiCrN-coated design uses two flutes and a 30° helix. Its flat end and radiused corners suit floor finishing and the fillets along adjacent walls.
⌀0.2–0.9 mm; 24 sizes.

UYNR-2-Flute Long-Neck Micro Radius Mill

Recommended for fine profiles and floor-to-wall fillets in recessed areas of prehardened steel parts.
A short cutting section and reduced neck provide wall clearance around localized features. Two flutes, a 30° helix and AlTiCrN coating suit fine profile and floor-fillet work.
⌀0.2–0.9 mm; 106 sizes.

KOA-Engraving Cutter

Recommended for lettering, fine-line engraving and edge chamfering in aluminum alloys, copper and resin.
The AlTiN-coated, single-flute conical tip is offered in different angles and tip sizes to suit fine lettering, engraved-line openings and chamfer profiles.
⌀0.05–1.5 mm; 61 sizes.

UYE-2-Flute Micro Square End Mill

For micro-slotting, side milling and flat-surface machining in carbon, alloy and prehardened steels.
Two flutes with a 30° helix and AlTiCrN coating provide a 2×D cutting length. The square-end geometry machines miniature slot walls and flat floors in small steps and detailed profiles.
⌀0.1–0.95 mm; 18 sizes.

MEBS-2-Flute Short-Shank Ball End Mill

Recommended for finishing curved surfaces and radii in prehardened and hardened steels when a short-shank, two-flute ball end mill is preferred.
TiSiN-coated, with the same radius, cutting length and shank diameter as the corresponding MEB sizes. Its 45 mm overall length is 5 mm shorter for setups requiring a shorter tool.
⌀1–4 mm; 40 sizes.

UYNE-2-Flute Long-Neck Micro End Mill

For miniature slots, sidewalls and stepped floors at greater reach in carbon, alloy and prehardened steels.
The AlTiCrN-coated, two-flute design has a 30° helix. A 1×D cutting length and reduced neck extend tool-tip access while providing clearance past the upper wall.
⌀0.1–0.9 mm; 97 sizes.

MEB-2-Flute Ball End Mill for Hardened Steel

Recommended for finishing 3D surfaces and radii in prehardened and hardened steels, including contoured molds and parts.
TiSiN coating, two flutes and a 30° helix are combined with a 2×D length of cut. The ball-nose profile suits continuous finishing across curved surfaces and blended radii.
⌀1–12 mm; 57 sizes.

MXR-4-Flute Radius End Mill for Hardened Steel

Recommended for wall profiling, slotting and floor-to-wall fillets in prehardened and hardened steels.
Four flutes and a 35° helix are paired with TiSiN coating. The flat end and radiused corners suit parts requiring both a machined floor and a filleted wall transition.
⌀1–12 mm; 77 sizes.

KOB-260° Ball Nose End Mill

Recommended for 3D profiling, side-facing curves and radius finishing in aluminum alloys, copper and resin.
The 260° spherical cutting edge extends behind the ball's equator. Combined with a reduced neck, it suits profiles approached from the side; the tool has two flutes and an AlTiN coating.
⌀1–16 mm; 12 sizes.

MENB-2-Flute Long-Neck Ball End Mill for Hardened Steel

Recommended for extended-reach finishing of 3D surfaces and radii in prehardened and hardened steels, particularly contours close to adjacent walls.
The TiSiN-coated, two-flute design has a 30° helix. Its short cutting section and reduced neck provide access and wall clearance for deeper contours, with multiple effective lengths available at each diameter.
⌀1–6 mm; 116 sizes.

MXE-4-Flute End Mill for Hardened Steel

For side milling, slotting and face milling in carbon, alloy and prehardened steels, as well as hardened steel at the 62 HRC level.
Four flutes, a 35° helix and TiSiN coating are paired with fractional-millimeter diameter options for slots and profiles that fall between whole-millimeter tool sizes.
⌀1–12 mm; 76 sizes.

Page：資料總數：74