UXEM-4-Flute Long-Flute End Mill

For side milling taller walls and steps in carbon, alloy and prehardened steels where a long cutting section is needed.
The AlTiCrN-coated, four-flute design has a 35° helix and an extended flute length, providing axial cutting coverage for walls beyond the reach of a standard-length cutting section.
⌀1–16 mm; 24 sizes.

UAR-3-Flute Corner Radius End Mill for Aluminum

Recommended for wall profiling, slotting and floor-to-wall fillets in aluminum alloys and copper.
The three-flute, 40°-helix design combines a flat end with radiused corners for machining floors and the fillets where they meet side walls.
⌀1–12 mm; 95 sizes.

UCML-ISO Internal Thread Mill, 3× Thread Length

Recommended for ISO metric internal threads requiring longer thread lengths in carbon, alloy and prehardened steels.
An extended effective length brings the cutting head to deeper thread locations, while the reduced neck provides wall clearance. The design uses a 15° helix and TiSiN coating.
⌀1.06–9.5 mm; 12 sizes.

UEBH-2-Flute Long-Shank Ball End Mill

Recommended for 3D contour and radius milling in carbon, alloy and prehardened steels, including mold surfaces and contoured parts.
AlTiCrN-coated, with two flutes and a 30° helix. The long shank is paired with a 2×D cutting length for contour milling that requires additional tool overhang.
⌀1–12 mm; 31 sizes.

UXNE-4-Flute Long-Neck End Mill

Four-flute long-neck square end mill for side and profile milling in carbon steel, alloy steel and prehardened steel.
The reduced neck provides side-wall clearance, with multiple effective lengths for deep slots and narrow ribs.
⌀1–8 mm; 85 specifications.

UENB-2-Flute Long-Neck Ball End Mill

Recommended for extended-reach 3D contouring and radii in carbon, alloy and prehardened steels, particularly features close to adjacent walls.
The two-flute, 30°-helix design uses AlTiCrN coating. Its short cutting section and reduced neck provide access and wall clearance for deeper contours, with multiple effective-length options at each diameter.
⌀1–6 mm; 116 sizes.

UCM-ISO Internal Spiral Thread Mill

Recommended for ISO metric internal thread milling in carbon, alloy and prehardened steels, with coarse- and fine-pitch options.
A multi-row cutting profile machines the thread along the wall of a prepared hole using helical interpolation. The design combines a 15° helix with TiSiN coating.
⌀2.4–20 mm; 22 sizes.

KOG-90°/120° Spot Drill for Ferrous Metals

• Recommended for spot drilling and hole-entry chamfering in carbon, alloy, prehardened and stainless steels.
• The AlTiN-coated design has two flutes and a 20° helix. Its 90° or 120° point establishes the location for subsequent drilling and can also machine the corresponding hole-entry angle.
• ⌀3–16 mm; 16 sizes.

UEE-2-Flute Square End Mill

For side milling, slotting and plunge milling in carbon, alloy and prehardened steels.
The two-flute, 30°-helix design has AlTiCrN coating, with fractional-millimeter diameters and cutting-length options for specific slot widths, wall heights and local profile details.
⌀1–12 mm; 71 sizes.

UCIS-UN Internal Thread Mill, 2× Thread Length

Recommended for shorter UN coarse- and fine-pitch internal threads in carbon, alloy and prehardened steels.
A compact threaded head and reduced neck provide wall clearance behind the cutting section. The cutter combines a 15° helix with TiSiN coating.
⌀1.4–14.4 mm; 21 sizes.

KOR-2-Flute Corner Rounding End Mill

• Recommended for rounding outside edges on aluminum, copper and resin parts to the specified corner radius.
• Two straight flutes and a formed radius edge follow the part perimeter to produce a convex corner, making the cutter suited to edges requiring a defined radius profile.
• ⌀0.6–7.6 mm; 34 sizes.

UXB-4-Flute Ball End Mill

• Recommended for 3D contouring in carbon, alloy and prehardened steels, as well as side milling and round-bottom slotting.
• This four-flute, 35°-helix tool has an AlTiCrN coating. Its ball-nose geometry follows curved surfaces and internal radii for mold contours and rounded transitions.
• ⌀1–12 mm; 17 sizes.