UEBS

UEBS-2-Flute Short-Shank Ball End Mill

Commodity Brief

Recommended for curved surfaces and radii in carbon, alloy and prehardened steels when a short-shank, two-flute ball end mill is preferred.
AlTiCrN-coated, with the same radius, cutting length and shank diameter as the corresponding UEB sizes. Its 45 mm overall length is 5 mm shorter for setups requiring a shorter tool.
⌀1–4 mm; 40 sizes.

Description of icons

Product Introduction

Carbon steel	Alloy steel	Pre-hardened steel	Stainless steel	Aluminum alloy	Copper	Resin	Graphite	Hard and brittle materials	Heat-resistant alloys	Workpiece Hardness
Carbon steel	Alloy steel	Pre-hardened steel	Stainless steel	Aluminum alloy	Copper	Resin	Graphite	Hard and brittle materials	Heat-resistant alloys	50HRC	55HRC	62HRC
◎	◎	◎	○	○	○	○					◎

Code No. UEBS	(R) Radius	(D) Dia.	(h) Length of Cut	(Y) Neck Taper Angle	(d) Shank Dia.	(L) Overall Length
3010	0.5	1	2	12	3	45
4010	0.5	1	2	12	4	45
6010	0.5	1	2	15	6	45
4011	0.55	1.1	2.2	12	4	45
4012	0.6	1.2	2.4	12	4	45
4013	0.65	1.3	2.6	12	4	45
4014	0.7	1.4	2.8	12	4	45
4015	0.75	1.5	3	12	4	45
6015	0.75	1.5	3	15	6	45
4016	0.8	1.6	3.2	12	4	45
4017	0.85	1.7	3.4	12	4	45
4018	0.9	1.8	3.6	12	4	45
4019	0.95	1.9	3.8	12	4	45
4020	1	2	4	12	4	45
6020	1	2	4	15	6	45
4021	1.05	2.1	4.2	12	4	45
4022	1.1	2.2	4.4	12	4	45
4023	1.15	2.3	4.6	12	4	45
4024	1.2	2.4	4.8	12	4	45
4025	1.25	2.5	5	12	4	45
6025	1.25	2.5	5	15	6	45
4026	1.3	2.6	5.2	12	4	45
4027	1.35	2.7	5.4	12	4	45
4028	1.4	2.8	5.6	12	4	45
4029	1.45	2.9	5.8	12	4	45
3030	1.5	3	6	-	3	45
4030	1.5	3	6	12	4	45
6030	1.5	3	6	15	6	45
4031	1.55	3.1	6.2	12	4	45
4032	1.6	3.2	6.4	12	4	45
4033	1.65	3.3	6.6	12	4	45
4034	1.7	3.4	6.8	12	4	45
4035	1.75	3.5	7	12	4	45
6035	1.75	3.5	7	15	6	45
4036	1.8	3.6	7.2	12	4	45
4037	1.85	3.7	7.4	12	4	45
4038	1.9	3.8	7.6	12	4	45
4039	1.95	3.9	7.8	12	4	45
4040	2	4	8	-	4	45
6040	2	4	8	15	6	45