UENB

UENB-2-Flute Long-Neck Ball End Mill

Commodity Brief

Recommended for extended-reach 3D contouring and radii in carbon, alloy and prehardened steels, particularly features close to adjacent walls.
The two-flute, 30°-helix design uses AlTiCrN coating. Its short cutting section and reduced neck provide access and wall clearance for deeper contours, with multiple effective-length options at each diameter.
⌀1–6 mm; 116 sizes.

Description of icons

Product Introduction

Carbon steel	Alloy steel	Pre-hardened steel	Stainless steel	Aluminum alloy	Copper	Resin	Graphite	Hard and brittle materials	Heat-resistant alloys	Workpiece Hardness
Carbon steel	Alloy steel	Pre-hardened steel	Stainless steel	Aluminum alloy	Copper	Resin	Graphite	Hard and brittle materials	Heat-resistant alloys	50HRC	55HRC	62HRC
◎	◎	◎	○	○	○	○					◎

Code No. UENB	(R) Radius	(D) Dia.	(h) Length of Cut	(h1) Effective Length	(d2) Neck Dia.	(Y) Neck Taper Angle	(d) Shank Dia.	(L) Overall Length
4-010-03	0.5	1	0.75	3	0.95	12	4	50
4-010-04	0.5	1	0.75	4	0.95	12	4	50
4-010-05	0.5	1	0.75	5	0.95	12	4	50
4-010-06	0.5	1	0.75	6	0.95	12	4	50
4-010-07	0.5	1	0.75	7	0.95	12	4	50
4-010-08	0.5	1	0.75	8	0.95	12	4	50
4-010-09	0.5	1	0.75	9	0.95	12	4	50
4-010-10	0.5	1	0.75	10	0.95	12	4	50
4-010-11	0.5	1	0.75	11	0.95	12	4	50
4-010-12	0.5	1	0.75	12	0.95	12	4	50
4-010-13	0.5	1	0.75	13	0.95	12	4	50
4-010-14	0.5	1	0.75	14	0.95	12	4	50
4-010-16	0.5	1	0.75	16	0.95	12	4	50
6-010-03	0.5	1	0.75	3	0.95	15	6	50
6-010-04	0.5	1	0.75	4	0.95	15	6	50
6-010-05	0.5	1	0.75	5	0.95	15	6	50
6-010-06	0.5	1	0.75	6	0.95	15	6	50
6-010-08	0.5	1	0.75	8	0.95	15	6	50
6-010-10	0.5	1	0.75	10	0.95	15	6	50
6-010-12	0.5	1	0.75	12	0.95	15	6	50
6-010-14	0.5	1	0.75	14	0.95	15	6	50
6-010-16	0.5	1	0.75	16	0.95	15	6	50
4-012-024	0.6	1.2	0.9	2.4	1.15	12	4	50
4-012-06	0.6	1.2	0.9	6	1.15	12	4	50
4-012-08	0.6	1.2	0.9	8	1.15	12	4	50
4-012-10	0.6	1.2	0.9	10	1.15	12	4	50
4-012-12	0.6	1.2	0.9	12	1.15	12	4	50
4-012-14	0.6	1.2	0.9	14	1.15	12	4	50
4-012-16	0.6	1.2	0.9	16	1.15	12	4	50
4-014-028	0.7	1.4	1	2.8	1.35	12	4	50
4-014-06	0.7	1.4	1	6	1.35	12	4	50
4-014-08	0.7	1.4	1	8	1.35	12	4	50
4-014-12	0.7	1.4	1	12	1.35	12	4	50
4-014-16	0.7	1.4	1	16	1.35	12	4	50
4-015-03	0.75	1.5	1.1	3	1.45	12	4	50
4-015-04	0.75	1.5	1.1	4	1.45	12	4	50
4-015-06	0.75	1.5	1.1	6	1.45	12	4	50
4-015-08	0.75	1.5	1.1	8	1.45	12	4	50
4-015-10	0.75	1.5	1.1	10	1.45	12	4	50
4-015-12	0.75	1.5	1.1	12	1.45	12	4	50
4-015-14	0.75	1.5	1.1	14	1.45	12	4	50
4-015-16	0.75	1.5	1.1	16	1.45	12	4	50
6-015-08	0.75	1.5	1.1	8	1.45	15	6	50
6-015-12	0.75	1.5	1.1	12	1.45	15	6	50
6-015-16	0.75	1.5	1.1	16	1.45	15	6	50
4-016-04	0.8	1.6	1.2	4	1.55	12	4	50
4-016-08	0.8	1.6	1.2	8	1.55	12	4	50
4-016-12	0.8	1.6	1.2	12	1.55	12	4	50
4-016-16	0.8	1.6	1.2	16	1.55	12	4	50
4-018-08	0.9	1.8	1.3	8	1.75	12	4	50
4-018-12	0.9	1.8	1.3	12	1.75	12	4	50
4-018-16	0.9	1.8	1.3	16	1.75	12	4	50
4-020-04	1	2	1.5	4	1.94	12	4	50
4-020-06	1	2	1.5	6	1.94	12	4	50
4-020-08	1	2	1.5	8	1.94	12	4	50
4-020-10	1	2	1.5	10	1.94	12	4	50
4-020-12	1	2	1.5	12	1.94	12	4	50
4-020-14	1	2	1.5	14	1.94	12	4	50
4-020-16	1	2	1.5	16	1.94	12	4	50
6-020-04	1	2	1.5	4	1.94	15	6	50
6-020-06	1	2	1.5	6	1.94	15	6	50
6-020-08	1	2	1.5	8	1.94	15	6	50
6-020-10	1	2	1.5	10	1.94	15	6	50
6-020-12	1	2	1.5	12	1.94	15	6	50
6-020-16	1	2	1.5	16	1.94	15	6	50
6-020-20	1	2	1.5	20	1.94	15	6	75
6-020-25	1	2	1.5	25	1.94	15	6	75
6-020-30	1	2	1.5	30	1.94	15	6	75
6-020-35	1	2	1.5	35	1.94	15	6	75
4-025-06	1.25	2.5	2.3	6	2.4	12	4	50
4-025-10	1.25	2.5	2.3	10	2.4	12	4	50
4-025-15	1.25	2.5	2.3	15	2.4	12	4	50
6-025-06	1.25	2.5	2.3	6	2.4	15	6	50
6-025-10	1.25	2.5	2.3	10	2.4	15	6	50
6-025-15	1.25	2.5	2.3	15	2.4	15	6	50
6-025-20	1.25	2.5	2.3	20	2.4	15	6	75
6-025-25	1.25	2.5	2.3	25	2.4	15	6	75
6-025-30	1.25	2.5	2.3	30	2.4	15	6	75
6-025-35	1.25	2.5	2.3	35	2.4	15	6	75
6-030-06	1.5	3	2.5	6	2.85	15	6	50
6-030-08	1.5	3	2.5	8	2.85	15	6	50
6-030-10	1.5	3	2.5	10	2.85	15	6	50
6-030-12	1.5	3	2.5	12	2.85	15	6	50
6-030-14	1.5	3	2.5	14	2.85	15	6	50
6-030-16	1.5	3	2.5	16	2.85	15	6	50
6-030-20	1.5	3	2.5	20	2.85	15	6	75
6-030-25	1.5	3	2.5	25	2.85	15	6	75
6-030-30	1.5	3	2.5	30	2.85	15	6	75
6-030-35	1.5	3	2.5	35	2.85	15	6	75
6-035-10	1.75	3.5	2.8	10	3.35	15	6	50
6-035-15	1.75	3.5	2.8	15	3.35	15	6	50
6-035-20	1.75	3.5	2.8	20	3.35	15	6	75
6-035-25	1.75	3.5	2.8	25	3.35	15	6	75
6-035-30	1.75	3.5	2.8	30	3.35	15	6	75
6-035-35	1.75	3.5	2.8	35	3.35	15	6	75
6-040-10	2	4	3	10	3.8	15	6	50
6-040-12	2	4	3	12	3.8	15	6	50
6-040-14	2	4	3	14	3.8	15	6	50
6-040-15	2	4	3	15	3.8	15	6	50
6-040-16	2	4	3	16	3.8	15	6	50
6-040-20	2	4	3	20	3.8	15	6	75
6-040-25	2	4	3	25	3.8	15	6	75
6-040-30	2	4	3	30	3.8	15	6	75
6-040-35	2	4	3	35	3.8	15	6	75
6-050-10	2.5	5	3.5	10	4.8	15	6	50
6-050-15	2.5	5	3.5	15	4.8	15	6	50
6-050-20	2.5	5	3.5	20	4.8	15	6	75
6-050-25	2.5	5	3.5	25	4.8	15	6	75
6-050-30	2.5	5	3.5	30	4.8	15	6	75
6-050-35	2.5	5	3.5	35	4.8	15	6	75
6-060-10	3	6	4.8	10	5.8	-	6	50
6-060-15	3	6	4.8	15	5.8	-	6	50
6-060-20	3	6	4.8	20	5.8	-	6	75
6-060-25	3	6	4.8	25	5.8	-	6	75
6-060-30	3	6	4.8	30	5.8	-	6	75
6-060-35	3	6	4.8	35	5.8	-	6	75