UENE

UENE-2-Flute Long-Neck End Mill

Commodity Brief

For sidewall milling and stepped-floor machining at greater reach in carbon, alloy and prehardened steels.
Two flutes with a 30° helix and AlTiCrN coating are combined with a short cutting section and reduced neck, extending tool-tip access to local profiles that require clearance past an upper wall.
⌀1–8 mm; 88 sizes.

Description of icons

Product Introduction

Carbon steel	Alloy steel	Pre-hardened steel	Stainless steel	Aluminum alloy	Copper	Resin	Graphite	Hard and brittle materials	Heat-resistant alloys	Workpiece Hardness
Carbon steel	Alloy steel	Pre-hardened steel	Stainless steel	Aluminum alloy	Copper	Resin	Graphite	Hard and brittle materials	Heat-resistant alloys	50HRC	55HRC	62HRC
◎	◎	◎	○	○	○	○					○

Code No. UENE	(D) Dia.	(h) Length of Cut	(h1) Effective Length	(d2) Neck Dia.	(Y) Shank Taper Angle	(d) Shank Dia.	(L) Overall Length
4-010-04	1	1.5	4	0.95	12	4	50
4-010-06	1	1.5	6	0.95	12	4	50
4-010-08	1	1.5	8	0.95	12	4	50
4-010-10	1	1.5	10	0.95	12	4	50
4-010-12	1	1.5	12	0.95	12	4	50
4-010-14	1	1.5	14	0.95	12	4	50
4-010-16	1	1.5	16	0.95	12	4	50
4-011-06	1.1	1.6	6	1.05	12	4	50
4-011-10	1.1	1.6	10	1.05	12	4	50
4-011-16	1.1	1.6	16	1.05	12	4	50
4-012-06	1.2	1.8	6	1.15	12	4	50
4-012-08	1.2	1.8	8	1.15	12	4	50
4-012-10	1.2	1.8	10	1.15	12	4	50
4-012-12	1.2	1.8	12	1.15	12	4	50
4-012-14	1.2	1.8	14	1.15	12	4	50
4-012-16	1.2	1.8	16	1.15	12	4	50
4-013-06	1.3	1.9	6	1.25	12	4	50
4-013-12	1.3	1.9	12	1.25	12	4	50
4-013-16	1.3	1.9	16	1.25	12	4	60
4-014-06	1.4	2.1	6	1.35	12	4	50
4-014-08	1.4	2.1	8	1.35	12	4	50
4-014-10	1.4	2.1	10	1.35	12	4	50
4-014-12	1.4	2.1	12	1.35	12	4	50
4-014-14	1.4	2.1	14	1.35	12	4	50
4-014-16	1.4	2.1	16	1.35	12	4	50
4-015-06	1.5	2.2	6	1.45	12	4	50
4-015-08	1.5	2.2	8	1.45	12	4	50
4-015-10	1.5	2.2	10	1.45	12	4	50
4-015-12	1.5	2.2	12	1.45	12	4	50
4-015-14	1.5	2.2	14	1.45	12	4	50
4-015-16	1.5	2.2	16	1.45	12	4	50
4-016-06	1.6	2.4	6	1.55	12	4	50
4-016-08	1.6	2.4	8	1.55	12	4	50
4-016-10	1.6	2.4	10	1.55	12	4	50
4-016-12	1.6	2.4	12	1.55	12	4	50
4-016-14	1.6	2.4	14	1.55	12	4	50
4-016-16	1.6	2.4	16	1.55	12	4	50
4-017-06	1.7	2.5	6	1.65	12	4	50
4-017-14	1.7	2.5	14	1.65	12	4	50
4-018-06	1.8	2.7	6	1.74	12	4	50
4-018-08	1.8	2.7	8	1.74	12	4	50
4-018-10	1.8	2.7	10	1.74	12	4	50
4-018-12	1.8	2.7	12	1.74	12	4	50
4-018-14	1.8	2.7	14	1.74	12	4	50
4-018-16	1.8	2.7	16	1.74	12	4	50
4-019-06	1.9	2.8	6	1.84	12	4	50
4-019-16	1.9	2.8	16	1.84	12	4	50
4-020-06	2	3	6	1.94	12	4	50
4-020-08	2	3	8	1.94	12	4	50
4-020-10	2	3	10	1.94	12	4	50
4-020-12	2	3	12	1.94	12	4	50
4-020-14	2	3	14	1.94	12	4	50
4-020-16	2	3	16	1.94	12	4	50
4-024-08	2.4	3.6	8	2.3	12	4	50
4-024-12	2.4	3.6	12	2.3	12	4	50
4-024-16	2.4	3.6	16	2.3	12	4	50
4-025-08	2.5	3.7	8	2.4	12	4	50
4-025-12	2.5	3.7	12	2.4	12	4	50
4-025-16	2.5	3.7	16	2.4	12	4	50
6-030-08	3	4.5	8	2.85	15	6	50
6-030-12	3	4.5	12	2.85	15	6	50
6-030-16	3	4.5	16	2.85	15	6	50
6-030-20	3	4.5	20	2.85	15	6	75
6-030-25	3	4.5	25	2.85	15	6	75
6-030-30	3	4.5	30	2.85	15	6	75
6-030-35	3	4.5	35	2.85	15	6	75
6-035-15	3.5	5.2	15	3.35	15	6	50
6-035-20	3.5	5.2	20	3.35	15	6	75
6-035-25	3.5	5.2	25	3.35	15	6	75
6-035-30	3.5	5.2	30	3.35	15	6	75
6-035-35	3.5	5.2	35	3.35	15	6	75
6-040-12	4	6	12	3.8	15	6	50
6-040-16	4	6	16	3.8	15	6	50
6-040-20	4	6	20	3.8	15	6	75
6-040-25	4	6	25	3.8	15	6	75
6-040-30	4	6	30	3.8	15	6	75
6-040-35	4	6	35	3.8	15	6	75
6-050-16	5	7.5	16	4.8	15	6	50
6-050-20	5	7.5	20	4.8	15	6	75
6-050-25	5	7.5	25	4.8	15	6	75
6-050-30	5	7.5	30	4.8	15	6	75
6-050-35	5	7.5	35	4.8	15	6	75
6-060-20	6	9	20	5.8	-	6	75
6-060-25	6	9	25	5.8	-	6	75
6-060-30	6	9	30	5.8	-	6	75
6-060-35	6	9	35	5.8	-	6	75
8-080-30	8	12	30	7.8	-	8	75
8-080-35	8	12	35	7.8	-	8	75