• UEBS
UEBS
Commodity Brief
Short Blank 2-Flute Ballnose End Mill
◼ Has higher wear resistance and strength.

Suitable for precision 3D cutting in the low to high speed range.

◼ Special design greatly increases tool rigidity and shock resistance, reduces tool breakage.

◼ It can meet the processing needs of different conditions and is the best choice in the Industry 4.0 era.

    Product Introduction

    Carbon SteelAlloy SteelPrehardened SteelStainless SteelAluminum AlloyCopperResinGraphiteHard Brittle MaterialHeat Resistant AlloyHardened Steel

    55HRC

    65HRC

    70HRC
     
            Code No.
      UEBS
    (R)
    Radius
    (h)
    Length of Cut
    (D)
    Dia.
    (Y)
    Neck Taper Angle
    (d)
    Shank Dia.
    (L)
    Overall Length
    3010R0.52112°345
    4010R0.52112°445
    6010R0.52115°645
    4011R0.552.21.112°445
    4012R0.62.41.212°445
    4013R0.652.61.312°445
    4014R0.72.81.412°445
    4015R0.7531.512°445
    6015R0.7531.515°645
    4016R0.83.21.612°445
    4017R0.853.41.712°445
    4018R0.93.61.812°445
    4019R0.953.81.912°445
    4020R14212°445
    6020R14215°645
    4021R1.054.22.112°445
    4022R1.14.42.212°445
    4023R1.154.62.312°445
    4024R1.24.82.412°445
    4025R1.2552.512°445
    6025R1.2552.515°645
    4026R1.35.22.612°445
    4027R1.355.42.712°445
    4028R1.45.62.812°445
    4029R1.455.82.912°445
    3030R1.563-345
    4030R1.56312°445
    6030R1.56315°645
    4031R1.556.23.112°445
    4032R1.66.43.212°445
    4033R1.656.63.312°445
    4034R1.76.83.412°445
    4035R1.7573.512°445
    6035R1.7573.515°645
    4036R1.87.23.612°445
    4037R1.857.43.712°445
    4038R1.97.63.812°445
    4039R1.957.83.912°445
    4040R284-445
    6040R28412°645
    Description of icons
    1
    Helix Angle
    • Left 11°
    • Left 20°
    • 12°
    • 20°
    • 25°
    • 30°
    • 35°
    • 35°/38°
    • 37°
    • 40°
    • 40°/42°
    • 45°
    • 50°
    • 15°
    • Left 15°
    2
    Applications
    • Side milling
    • Slotting
    • 3D milling
    • Face milling
    • Pluging
    • Drilling
    • Thead milling
    • C chamfering
    • R chamfering
    • Chamfer
    • Deep Side Groove
    3
    Number of FluteFlute number of end mill
    • 1-flute
    • 2-flute
    • 3-flute
    • 4-flute
    • 6-flute
    • 8-flute
    • 10-flute
    4
    Possibility for material Hardness
    • Possible to cut up to 55HRC
    • Possible to cut up to 62HRC
    • Possible to cut up to 65HRC
    • Possible to cut up to 68HRC
    • Possible to cut up to 70HRC
    • Possible to cut up to 50HRC
    5
    Corner
    • Corner edge
    • Sharp edge
    6
    Material
    • CBN
    • MG
    • PCD
    • SCD
    • SMG
    • WC
    7
    Coating
    • Arti-CO
    • nACo-Blue
    • DLC
    • DR
    • TinSin
    • Uni-Co
    • ZrN