KOE-Chamfer Mill

Commodity Brief

Recommended for edge chamfering and edge finishing on stainless-steel, aluminum and copper parts.
The TiSiN-coated cutter has four straight flutes. Different tip-diameter and taper-angle combinations accommodate the specified chamfer along outer edges and side faces.
⌀0.4–1.2 mm; 29 sizes.

Carbon steel	Alloy steel	Pre-hardened steel	Stainless steel	Aluminum alloy	Copper	Resin	Graphite	Hard and brittle materials	Heat-resistant alloys	Workpiece Hardness
Carbon steel	Alloy steel	Pre-hardened steel	Stainless steel	Aluminum alloy	Copper	Resin	Graphite	Hard and brittle materials	Heat-resistant alloys	50HRC	55HRC	62HRC
○	○	○	◎	◎	◎

Code No. KOE	(D) Tip Dia.	(θ˚) Taper Angle	(h) Length of Cut	(t) Number of Flutes	(Y) Shank Taper Angle	(d) Shank Dia.	(L) Overall Length
10-100-30	1	30	16.79	4	-	10	70
12-120-30	1.2	30	20.15	4	-	12	75
10-100-40	1	40	12.36	4	-	10	70
12-120-40	1.2	40	14.84	4	-	12	75
10-100-50	1	50	9.65	4	-	10	70
12-120-50	1.2	50	11.58	4	-	12	75
4-040-60	0.4	60	3.12	4	-	4	50
6-060-60	0.6	60	4.68	4	-	6	50
8-080-60	0.8	60	6.24	4	-	8	60
10-100-60	1	60	7.79	4	-	10	70
12-120-60	1.2	60	9.35	4	-	12	75
10-100-70	1	70	6.43	4	-	10	70
12-120-70	1.2	70	7.71	4	-	12	75
10-100-80	1	80	5.36	4	-	10	70
12-120-80	1.2	80	6.44	4	-	12	75
4-040-90	0.4	90	1.8	4	-	4	50
6-060-90	0.6	90	2.7	4	-	6	50
8-080-90	0.8	90	3.6	4	-	8	60
10-100-90	1	90	4.5	4	-	10	70
12-120-90	1.2	90	5.4	4	-	12	75
10-100-100	1	100	3.78	4	-	10	70
12-120-100	1.2	100	4.53	4	-	12	75
10-100-110	1	110	3.15	4	-	10	70
12-120-110	1.2	110	3.78	4	-	12	75
4-040-120	0.4	120	1.04	4	-	4	50
6-060-120	0.6	120	1.56	4	-	6	50
8-080-120	0.8	120	2.08	4	-	8	60
10-100-120	1	120	2.6	4	-	10	70
12-120-120	1.2	120	3.12	4	-	12	75