KOT-T-Slot Cutter

Commodity Brief

Recommended for milling T-slots and lateral grooves in carbon, alloy and prehardened steel parts.
The TiSiN-coated head has six straight flutes. Its reduced neck enters a pre-machined slot so the head can mill the widened lower section from the side to form the T-slot profile.
⌀4–12 mm; 35 sizes.

Description of icons

Product Introduction

Carbon steel	Alloy steel	Pre-hardened steel	Stainless steel	Aluminum alloy	Copper	Resin	Graphite	Hard and brittle materials	Heat-resistant alloys	Workpiece Hardness
Carbon steel	Alloy steel	Pre-hardened steel	Stainless steel	Aluminum alloy	Copper	Resin	Graphite	Hard and brittle materials	Heat-resistant alloys	50HRC	55HRC	62HRC
◎	◎	◎	○	○	○	○

Code No. KOT	(D) Dia.	(h) Length of Cut	(h1) Effective Length	(d2) Neck Dia.	(Y) Shank Taper Angle	(d) Shank Dia.	(L) Overall Length
4-040-05	4	0.5	8	2.5	-	4	50
4-040-06	4	0.6	8	2.5	-	4	50
4-040-07	4	0.7	8	2.5	-	4	50
4-040-08	4	0.8	8	2.5	-	4	50
4-040-09	4	0.9	8	2.5	-	4	50
4-040-10	4	1	8	2.5	-	4	50
4-040-15	4	1.5	8	2.5	-	4	50
4-040-20	4	2	8	2.5	-	4	50
6-050-05	5	0.5	10	2.5	15	6	50
6-050-06	5	0.6	10	2.5	15	6	50
6-050-07	5	0.7	10	2.5	15	6	50
6-050-08	5	0.8	10	2.5	15	6	50
6-050-09	5	0.9	10	2.5	15	6	50
6-050-10	5	1	10	2.5	15	6	50
6-050-15	5	1.5	10	2.5	15	6	50
6-050-20	5	2	10	2.5	15	6	50
6-060-05	6	0.5	12	3	-	6	50
6-060-06	6	0.6	12	3	-	6	50
6-060-07	6	0.7	12	3	-	6	50
6-060-08	6	0.8	12	3	-	6	50
6-060-09	6	0.9	12	3	-	6	50
6-060-10	6	1	12	3	-	6	50
6-060-15	6	1.5	12	3	-	6	50
6-060-20	6	2	12	3	-	6	50
8-080-10	8	1	16	4	-	8	60
8-080-15	8	1.5	16	4	-	8	60
8-080-20	8	2	16	4	-	8	60
10-100-10	10	1	20	5	-	10	75
10-100-15	10	1.5	20	5	-	10	75
10-100-20	10	2	20	5	-	10	75
10-100-30	10	3	20	5	-	10	75
12-120-10	12	1	24	6	-	12	75
12-120-15	12	1.5	24	6	-	12	75
12-120-20	12	2	24	6	-	12	75
12-120-30	12	3	24	6	-	12	75