商品明細
UPE-4-Flute Heavy-Duty End Mill, 45° Helix
Commodity Brief
Recommended for side milling, slotting and face milling in carbon, alloy and prehardened steels.
Four flutes with a 45° helix and an AlTiCrN coating are suited to continuous side-profile and groove milling, with the helical edges entering the cut progressively.
⌀3–20 mm; 21 sizes.
Product Introduction
| Carbon steel | Alloy steel | Pre-hardened steel | Stainless steel | Aluminum alloy | Copper | Resin | Graphite | Hard and brittle materials | Heat-resistant alloys | Workpiece Hardness |
|---|
| 50HRC | 55HRC | 62HRC |
|---|
| ◎ | ◎ | ◎ | ○ | ○ | ○ | ○ | | | | | ◎ | |
Code No.
UPE | (D)
Dia. | (h)
Length of Cut | (Y)
Shank Taper Angle | (d)
Shank Dia. | (L)
Overall Length |
|---|
| 4030 | 3 | 8 | 12 | 4 | 50 |
| 403009 | 3 | 9 | 12 | 4 | 50 |
| 6030 | 3 | 8 | 15 | 6 | 50 |
| 603009 | 3 | 9 | 15 | 6 | 50 |
| 4040 | 4 | 10 | - | 4 | 50 |
| 404012 | 4 | 12 | - | 4 | 50 |
| 6040 | 4 | 10 | 15 | 6 | 50 |
| 604012 | 4 | 12 | 15 | 6 | 50 |
| 6050 | 5 | 13 | 15 | 6 | 50 |
| 605015 | 5 | 15 | 15 | 6 | 50 |
| 6060 | 6 | 15 | - | 6 | 50 |
| 606018 | 6 | 18 | - | 6 | 50 |
| 8080 | 8 | 20 | - | 8 | 60 |
| 808024 | 8 | 24 | - | 8 | 60 |
| 10100 | 10 | 25 | - | 10 | 75 |
| 1010030 | 10 | 30 | - | 10 | 75 |
| 12120 | 12 | 30 | - | 12 | 75 |
| 1212036 | 12 | 36 | - | 12 | 75 |
| 16160 | 16 | 40 | - | 16 | 100 |
| 1616048 | 16 | 48 | - | 16 | 100 |
| 20200 | 20 | 50 | - | 20 | 100 |