商品明細
KAEP-3-Flute End Mill for Aluminum
Commodity Brief
Recommended for side milling, slotting and face milling in aluminum alloy and copper parts.
Three flutes with a 50° helix enter the cut progressively during side milling. The flute channels provide a path for aluminum and copper chips during continuous wall-profile machining.
⌀1–20 mm; 33 sizes.
Product Introduction
| Carbon steel | Alloy steel | Pre-hardened steel | Stainless steel | Aluminum alloy | Copper | Resin | Graphite | Hard and brittle materials | Heat-resistant alloys | Workpiece Hardness |
|---|
| 50HRC | 55HRC | 62HRC |
|---|
| | | | | ◎ | ◎ | ○ | | | | | | |
Code No.
KAEP | (D)
Dia. | (h)
Length of Cut | (Y)
Shank Taper Angle | (d)
Shank Dia. | (L)
Overall Length |
|---|
| 4010 | 1 | 3 | 12 | 4 | 50 |
| 6010 | 1 | 3 | 15 | 6 | 50 |
| 4015 | 1.5 | 4.5 | 12 | 4 | 50 |
| 4020 | 2 | 6 | 12 | 4 | 50 |
| 6020 | 2 | 6 | 15 | 6 | 50 |
| 4025 | 2.5 | 7.5 | 12 | 4 | 50 |
| 6025 | 2.5 | 7.5 | 15 | 6 | 50 |
| 4030 | 3 | 9 | 12 | 4 | 50 |
| 6030 | 3 | 9 | 15 | 6 | 50 |
| 4035 | 3.5 | 10.5 | 12 | 4 | 50 |
| 6035 | 3.5 | 10.5 | 15 | 6 | 50 |
| 4040 | 4 | 12 | - | 4 | 50 |
| 6040 | 4 | 12 | 15 | 6 | 50 |
| 6045 | 4.5 | 13.5 | 15 | 6 | 50 |
| 6050 | 5 | 15 | 15 | 6 | 50 |
| 6055 | 5.5 | 16.5 | 15 | 6 | 50 |
| 6060 | 6 | 18 | - | 6 | 50 |
| 8065 | 6.5 | 19 | 15 | 8 | 60 |
| 8070 | 7 | 21 | 15 | 8 | 60 |
| 8075 | 7.5 | 22.5 | 15 | 8 | 60 |
| 8080 | 8 | 24 | - | 8 | 60 |
| 10085 | 8.5 | 25.5 | 15 | 10 | 75 |
| 10090 | 9 | 27 | 15 | 10 | 75 |
| 10095 | 9.5 | 28.5 | 15 | 10 | 75 |
| 10100 | 10 | 30 | - | 10 | 75 |
| 12105 | 10.5 | 31.5 | 15 | 12 | 75 |
| 12110 | 11 | 33 | 15 | 12 | 75 |
| 12115 | 11.5 | 34.5 | 15 | 12 | 75 |
| 12120 | 12 | 36 | - | 12 | 75 |
| 16160 | 16 | 48 | - | 16 | 100 |
| 1616055 | 16 | 55 | - | 16 | 100 |
| 2020050 | 20 | 50 | - | 20 | 100 |
| 20200 | 20 | 60 | - | 20 | 120 |