商品明細
KAEPM-3-Flute Long-Flute End Mill for Aluminum
Commodity Brief
Recommended for side milling taller walls in aluminum alloy and copper parts.
The long-flute design combines three flutes and a 50° helix. Versions with a 4×D or 5×D cutting length extend the peripheral cutting section along taller walls.
⌀1–20 mm; 27 sizes.
Product Introduction
| Carbon steel | Alloy steel | Pre-hardened steel | Stainless steel | Aluminum alloy | Copper | Resin | Graphite | Hard and brittle materials | Heat-resistant alloys | Workpiece Hardness |
|---|
| 50HRC | 55HRC | 62HRC |
|---|
| | | | | ◎ | ◎ | ○ | | | | | | |
Code No.
KAEPM | (D)
Dia. | (h)
Length of Cut | (Y)
Shank Taper Angle | (d)
Shank Dia. | (L)
Overall Length |
|---|
| 4-010-04 | 1 | 4 | 12 | 4 | 75 |
| 4-010-05 | 1 | 5 | 12 | 4 | 75 |
| 4-015-06 | 1.5 | 6 | 12 | 4 | 75 |
| 4-015-075 | 1.5 | 7.5 | 12 | 4 | 75 |
| 4-020-08 | 2 | 8 | 12 | 4 | 75 |
| 4-020-10 | 2 | 10 | 12 | 4 | 75 |
| 4-040-16 | 4 | 16 | - | 4 | 75 |
| 6-020-08 | 2 | 8 | 15 | 6 | 75 |
| 6-020-10 | 2 | 10 | 15 | 6 | 75 |
| 6-030-12 | 3 | 12 | 15 | 6 | 75 |
| 6-030-15 | 3 | 15 | 15 | 6 | 75 |
| 6-040-16 | 4 | 16 | 15 | 6 | 75 |
| 6-040-20 | 4 | 20 | 15 | 6 | 75 |
| 6-050-20 | 5 | 20 | 15 | 6 | 75 |
| 6-050-25 | 5 | 25 | 15 | 6 | 75 |
| 6-060-24 | 6 | 24 | - | 6 | 75 |
| 6-060-30 | 6 | 30 | - | 6 | 75 |
| 8-080-32 | 8 | 32 | - | 8 | 75 |
| 8-080-40 | 8 | 40 | - | 8 | 100 |
| 10-100-40 | 10 | 40 | - | 10 | 100 |
| 10-100-50 | 10 | 50 | - | 10 | 100 |
| 12-120-48 | 12 | 48 | - | 12 | 100 |
| 12-120-60 | 12 | 60 | - | 12 | 120 |
| 16-160-64 | 16 | 64 | - | 16 | 120 |
| 16-160-80 | 16 | 80 | - | 16 | 150 |
| 20-200-80 | 20 | 80 | - | 20 | 150 |
| 20-200-100 | 20 | 100 | - | 20 | 200 |