商品明細
KAB-2-Flute Ball End Mill for Aluminum
Commodity Brief
- Recommended for 3D surfaces and internal radii on aluminum parts, including curved profiles and rounded transitions.
- The ball nose machines concave profiles and fillets, while the two-flute layout leaves space for chip evacuation during continuous contour passes.
- ⌀1–16 mm; 16 sizes.
Product Introduction
| Carbon steel | Alloy steel | Pre-hardened steel | Stainless steel | Aluminum alloy | Copper | Resin | Graphite | Hard and brittle materials | Heat-resistant alloys | Workpiece Hardness |
|---|
| 50HRC | 55HRC | 62HRC |
|---|
| | | | | ◎ | ○ | ○ | | | | | | |
Code No.
KAB | (R)
Radius | (D)
Dia. | (h)
Length of Cut | (Y)
Shank Taper Angle | (d)
Shank Dia. | (L)
Overall Length |
|---|
| 4010 | 0.5 | 1 | 3 | 12 | 4 | 50 |
| 6010 | 0.5 | 1 | 3 | 15 | 6 | 50 |
| 4015 | 0.75 | 1.5 | 4.5 | 12 | 4 | 50 |
| 6015 | 0.75 | 1.5 | 4.5 | 15 | 6 | 50 |
| 4020 | 1 | 2 | 6 | 12 | 4 | 50 |
| 6020 | 1 | 2 | 6 | 15 | 6 | 50 |
| 4030 | 1.5 | 3 | 9 | 12 | 4 | 50 |
| 6030 | 1.5 | 3 | 9 | 15 | 6 | 50 |
| 4040 | 2 | 4 | 12 | - | 4 | 50 |
| 6040 | 2 | 4 | 12 | 15 | 6 | 50 |
| 6050 | 2.5 | 5 | 15 | 15 | 6 | 50 |
| 6060 | 3 | 6 | 18 | - | 6 | 50 |
| 8080 | 4 | 8 | 24 | - | 8 | 60 |
| 10100 | 5 | 10 | 30 | - | 10 | 75 |
| 12120 | 6 | 12 | 36 | - | 12 | 75 |
| 16160 | 8 | 16 | 48 | - | 16 | 100 |