KAEPMS

KAEPMS-Short-Shank 3-Flute Long-Flute End Mill for Aluminum

Commodity Brief

Recommended for side milling, slotting and face milling in aluminum alloys and copper.
The short-shank design combines three flutes, a 50° helix and a long cutting section for contour milling along taller walls.
⌀1–4 mm; 23 sizes.

Description of icons

Product Introduction

Carbon steel	Alloy steel	Pre-hardened steel	Stainless steel	Aluminum alloy	Copper	Resin	Graphite	Hard and brittle materials	Heat-resistant alloys	Workpiece Hardness
Carbon steel	Alloy steel	Pre-hardened steel	Stainless steel	Aluminum alloy	Copper	Resin	Graphite	Hard and brittle materials	Heat-resistant alloys	50HRC	55HRC	62HRC
				◎	◎	○

Code No. KAEPMS	(D) Dia.	(h) Length of Cut	(Y) Shank Taper Angle	(d) Shank Dia.	(L) Overall Length
4-010-04	1	4	12	4	50
4-010-05	1	5	12	4	50
4-010-07	1	7	12	4	50
4-010-10	1	10	12	4	50
4-015-06	1.5	6	12	4	50
4-015-075	1.5	7.5	12	4	50
4-015-105	1.5	10.5	12	4	50
4-020-08	2	8	12	4	50
4-020-10	2	10	12	4	50
4-020-14	2	14	12	4	50
4-025-10	2.5	10	12	4	50
4-025-125	2.5	12.5	12	4	50
6-015-105	1.5	10.5	15	6	50
6-020-08	2	8	15	6	50
6-020-10	2	10	15	6	50
6-020-14	2	14	15	6	50
6-025-10	2.5	10	15	6	50
6-025-125	2.5	12.5	15	6	50
6-030-12	3	12	15	6	50
6-030-15	3	15	15	6	50
6-030-21	3	21	15	6	60
6-035-14	3.5	14	15	6	50
6-040-16	4	16	15	6	60