UAB-2-Flute Ball End Mill for Aluminum

Commodity Brief

Recommended for 3D contours and internal radii on aluminum parts, including curved profiles and fine-radius details.
The 40° helix and two-flute chip space suit continuous contour passes in aluminum, while the ball nose machines internal fillets at profile transitions.
⌀0.6–16 mm; 19 sizes.

Carbon steel	Alloy steel	Pre-hardened steel	Stainless steel	Aluminum alloy	Copper	Resin	Graphite	Hard and brittle materials	Heat-resistant alloys	Workpiece Hardness
Carbon steel	Alloy steel	Pre-hardened steel	Stainless steel	Aluminum alloy	Copper	Resin	Graphite	Hard and brittle materials	Heat-resistant alloys	50HRC	55HRC	62HRC
				◎	○	○

Code No. UAB	(R) Radius	(D) Dia.	(h) Length of Cut	(Y) Shank Taper Angle	(d) Shank Dia.	(L) Overall Length
4006	0.3	0.6	1.2	12	4	50
4007	0.35	0.7	1.4	12	4	50
4008	0.4	0.8	1.6	12	4	50
4009	0.45	0.9	1.8	12	4	50
4010	0.5	1	2	12	4	50
4015	0.75	1.5	3	12	4	50
4020	1	2	4	12	4	50
4030	1.5	3	6	12	4	50
6030	1.5	3	6	15	6	50
4035	1.75	3.5	7	12	4	50
6035	1.75	3.5	7	15	6	50
4040	2	4	8	-	4	50
6040	2	4	8	15	6	50
6050	2.5	5	10	15	6	50
6060	3	6	12	-	6	50
8080	4	8	16	-	8	60
10100	5	10	20	-	10	75
12120	6	12	24	-	12	75
16160	8	16	32	-	16	100